Furuno MU-201C Operator's Manual page 9

3. Attach the cosmetic cap (supplied as accessories) to the display unit at the locations
shown in the drawing on page 1.
Note: If necessary, fill gap between the mounting panel and the display unit chassis with
sealing material.
Desktop mounting
The display unit can be mounted on a desktop, using the optional bracket kit (Type:
FP03-09820, Code No.: 008-535-560).
Name
Hanger L (20)
Hanger R (20)
Hanger stay (20)
Hole plug
Plastic rivet
Hex bolt
Hex bolt
Spring washer
Flat washer
1. Assemble two hangers and hanger stay with two hex bolts (M10x30), spring washers
and flat washers and cover each hex bolt with hole plug.
2. Fix the above assembly to the mounting location with four hex bolts (M10, dockyard
supply).
3. Fasten the display unit to the bracket with four hex bolts (M6x25, supplied).
4. Cover each hex bolt with cosmetic cap.
5. Cover each hole for handle on the hanger with plastic rivet.
Contents of bracket kit
Type
03-163-1111
03-163-1112
03-163-1113
CP-30-HP-13
For KB-13, black button
M6x25
M10x30
M10
M10
2
Code No. Qty
100-305-141
100-305-181
100-305-191
000-147-143
000-570-276
000-802-771
000-802-182
000-864-261
000-864-131
1
1
1
2
4
4
2
2
2