System Configuration - Furuno TZT19F Installation Manual

Multi function
Hide thumbs Also See for TZT19F:
Table of Contents

Advertisement

SYSTEM CONFIGURATION

Radar Sensor (Radome)
DRS4DL/DRS4DL+/DRS4D-NXT
12 to 24VDC
: Standard supply
: Optional/local supply
Control Unit MCU-005
FA-40/70
Autopilot
NAVpilot-300/
NAVpilot-711C
SCX-20
SC-30/33
GP-330B
FI-50/70
IF-NMEA2K2
IF-NMEAFI
Category of units
Antenna unit: Exposed to the weather.
Other units: Protected from the weather.
1
*
: This unit has a built-in fish finder as standard.
2
*
: A maximum of 6 units of NavNet TZtouch2/3 can be connected. NavNet TZouch2 requires software
version 7 or later, which is to be released in Spring 2020. For configurations with TZT2BB included,
a maximum of 4 NavNet TZtouch2/3 units can be connected. NavNet TZtouch cannot be connected.
3
*
: Use a commercially available PoE hub. The NETGEAR GS108PE has tested as compatible.
The basic functions of the hub were verified, however the compatibility of all functions were not
checked. FURUNO cannot guarantee proper operation.
*
4
: When using a USB OTG as a USB host device, this equipment operates as a touch operation
output device.
*
5
: The HDMI output resolution is fixed to 1920×1080. To use a touch monitor for operation, its
resolution must be 1920×1080 (Aspect ratio 16:9) with HPD (Hot Plug Detection) function.
*
6
: Some transducers require connection of a 12-to-10 pin conversion cable.
*
7
: 12 VDC is only used with DRS6A-NXT.
ii
DRS6A X-Class/DRS12A X-Class/DRS25A X-Class
Select an antenna type:
Radome or Open.
Ethernet
Hub*
HUB-101
PoE Hub*
3
Junction
Box
FI-5002
Multi Function
Multi Function
Ship's main
12 to 24VDC
Transducer
Radar Sensor (Open)
DRS6A-NXT/DRS12A-NXT/DRS25A-NXT
*7
12
to 24VDC
FAR-2xx7/2xx8 series
FAR-15x3/15x8 series
BBDS1, DFF series
Multi-beam Sonar DFF-3D
Multi-beam Sonar DFF-3D
FA-30/50
2
FAX-30
IP Camera
FUSION-Link compatible devices
HDMI Source Devices
USB Host/Devices*
Control Unit
USB Hub
MCU-002/MCU-004 or
SD Card Unit SDU-001
Touch Monitor*
(HDMI Output)
CCD Camera
CCD Camera
Display*
Display*
1
1
TZT19F
TZT19F
Event Switch
External Buzzer
Power Switch
NMEA0183 Output
Fish Finder
Power Amplifier
DI-FFAMP
or
Transducer
4
5

Advertisement

Table of Contents
loading

Table of Contents