Maintenance Schedule - Cop Emission Optimized; Cop Emission Optimized - Service Level 1 - Version: 2018/06-1 - Kohler KD36V16 Operation And Maintenance Manual

Operation and Maintenance Manual
5.10 Maintenance schedule — COP Emission
5.10.1 COP Emission optimized — Service level 1 - Version:
SL100 Oil analysis
SL121 Engine oil and oil
filter with lube oil
"Category 1"
V-ribbed fan belt
SL121 Engine oil and oil
filter with lube oil
"Category 2"
SL105 Main fuel filter
SL106 Primary fuel filter
SL121 Engine oil and oil
filter with lube oil
"Category 3"
SL107 Crankcase
breather
SL118 V-ribbed fan belt
SL108 Air filter
SL109 V-ribbed belt for
battery charging
alternator
SL116 Coolant
(Glysantin G48)
SL120 Coolant analysis
Tab. 29: COP Emission optimized — Service level 1
KD36V16 33521029701_1_1 en 2018-08-01
optimized
2018/06-1
250 2 X
250 2 X
500 X Check belt tension.
500 2 X
1000 2 X
1000 2
1000 2 X
2000 2 X
2000 2 X
3000 2 X
4000 2 X
6000 4 X
2 X Take coolant sample and perform coolant analysis.
© 2018 by Kohler Co. All rights reserved.
Operating fluids and maintenance
Maintenance schedule — COP Emission optimized
Take oil sample and perform oil analysis. Carry out after
500 h for category 3 and 2 lubricant.
Replace Diesel engine oil and oil filter insert (at least every
2 years). Perform once after 250 hours. At the latest after
one year.
Replace Diesel engine oil and oil filter insert (at least every
2 years). Perform once after 250 hours. At the latest after
one year.
Replace main fuel filter.
Replace the primary fuel filter.
Replace Diesel engine oil and oil filter insert (at least every
2 years). Perform once after 250 hours. At the latest after
one year.
Replace oil separator filter insert.
Replace belt.
Replace air filter main element.
Check state of belt drive, replace if necessary.
Replace coolant. For coolant formulated with Glysantin
G40, the extension up to 8000h / 6Y is possible after
analysis.
61