Media Block State; Process/Component; Memory; Power Supplies - Sony Screen Management System User Manual

Also, the status of various operational areas within the unit
are indicated. Those areas are:

• Process/Component

Video, Audio, Process, and Battery

• Memory

DIMM 1 and DIMM 2

• Power Supplies

Power Source 1 and Power Source 2
• Security
Security Module and Forensic Mark
When Media Block is selected from the Status Menu the
MEDIA BLOCK information is displayed.

Media Block State

Process/Component
Power Supplies
Media Block State
The State indicator for the Media Block are as follows:
• READY
When illuminated (GREEN), indicates the Media
Block is operational.
• PLAY
When illuminated (GREEN), indicates the Media
Block is currently in PLAY mode.
• ALARM
When illuminated (RED), indicates there is a
problem with the Media Block operation. If during,
the start up process the RAID encounters a problem,
this indicator will be illuminated.
To clear the Alarm indication, tap Clear Alarm.
Note
Currently, the Media Block can be either Playing, i.e.,
decoding and sending Content Elements to the projector,
or it can be Ingesting.
Memory
Security
Clear
Alarm
Process/Component
Included in the MEDIA BLOCK System group are three
indicators:
• Video
Indicates the status or health of the video signal
processing.
• Audio
Indicates the status or health of the audio signal
processing.
• Process
Indicates the status or health of the signal
(image/sound essence) processing.
• Battery
Indicates the status or health of the internal batteries
that provides power to sustain Media Block settings.
Memory
• DIMM 1
Indicates the status or health of the #1 Dual Inline
Memory Module (DIMM) installed in the Media
Block.
• DIMM 2
Indicates the status or health of the #2 Dual Inline
Memory Module (DIMM) installed in the Media
Block.
Power Supplies
Two Power Sources can be present in the Media Block.
• Power Source 1
Indicates the status or health of the #1 Power Supply
installed in the Media Block.
2
• Power Source 2
Indicates the status or health of the #2 Power Supply
installed in the Media Block.
1.Located in the Media Block fan units.
2.The presence of a 2nd Power Supply in the Media Block
is optional.
1
57
Status