Table of Contents
Advertisement
48
Loading a seam appearance into the controller from the
USB stick : Value 1
To load a seam appearance into the controller:
1.
Use the +/– Function buttons to set a value of 1.
2.
Press the Select button and select the desired seam appea-
rance file (HSR2000.csv ~ HSR2099.csv).
3.
Press the Select button to load the seam appearance from
the USB stick.
The Function display shows the value ok,the controller
beeps and the seam appearance is now saved.
4.
Press the Reset button twice.
Saving a seam appearance from the controller to the USB
stick: Value 2
To save a seam appearance from the controller to the USB stick:
1.
Use the +/– Function buttons to set a value of 2.
2.
Press the Select button to save the seam appearance to the
USB stick (HSW2001.csv = U01 ~ HSW2010.csv = U10).
3.
Press the Select button to confirm the save operation.
The Function display shows the value ok,the controller
beeps and the seam appearance is now saved.
4.
Press the Reset button twice.
Deleting a seam appearance from the controller: Value 3
To delete a seam appearance from the controller:
1.
Use the +/– Function buttons to set a value of 3.
2.
Press the Select button.
3.
Press the Reset button to confirm the deletion.
Function display shows "----".
Operating Instructions 512/532 - 05.0 - 04/2018
Programming
Advertisement
Table of Contents
