reMOve THe WaTer LeveL PreSSure SWiTCH
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Remove the control panel (see page 4-1).
2.
Remove the air hose attached to the side of
the switch.
3.
Remove two wire harness plugs from the
front of the switch.
Wire harness
plugs
4.
Rotate the switch and pull it out of the
bracket that secures it to the feature panel.
The bracket has a rectangular slot that the
switch mounts into.
air hose
4-10