Defining Authorisation; Emergency Numbers - Siemens Gigaset CX203isdn Owner's Manual

Security settings

Defining authorisation

You can set different authorisations for all registered devices:
Unrestricted (set as factory default)
◆
All devices can answer incoming calls and make outgoing external/internal calls.
◆ Incoming only
The devices can only answer incoming external calls. External outgoing calls are not
possible. Internal calls (outgoing and incoming) are possible. Emergency numbers
can be dialled.
◆ Internal only
The devices can only be used for internal calls (incoming and outgoing). Emergency
numbers can be dialled.
i
s
Set base
s
Settings
~
OK
Security
s
Authorisation
s
INT11: Int.11
W
s
Internal only
j

Emergency numbers

By default, the country-specific emergency numbers are entered. You cannot change or
delete these. You can enter five emergency numbers of your own.
i
The emergency number can also be dialled by a handset with restricted
authorisation (e.g. Internal only).
90
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
If required, enter the PIN and confirm (page 89).
Confirm.
OK
Select the menu item and confirm.
OK
Select internal number, e.g. INT11: Int.11.
Press the display key to open the submenu.
Select authorisation and confirm (‰ = set),
OK
e.g. Internal only.
Hold down (back to idle status).