Siemens Gigaset CX203isdn Owner's Manual page 88

s
INT11: Internal 11
or ...
s
Answering mach.
s
AM2
... then
j
Night service, internal: If the internal user is not registered or cannot
◆
be reached (e.g. terminal deactivated), the call is not signalled and
the caller receives the busy signal.
i
Night service to an answering machine: Even if the answering
◆
machine is deactivated, a call is signalled on the answering machine
and the answering machine takes the call after the set number of
rings (page 76).
Entering the start and end time for Night service
By default, the Start time is pre-set to 20:00 or 8:00 pm, and 08:00 or 8:00 am for the
.
End time
i
s
Set base
s
Night service
s
either ...
s
Start time
~
or ...
s
End time
~
... then
W
Save entry
j
Select internal number, e.g. INT11: Internal 11
(‰ = set).
Select the answering machine (for CX253isdn):
Select the menu item and confirm.
OK
Select the answering machine you would like
e.g. AM2. The calls are forwarded to the selected
answering machine.
Hold down (back to idle status).
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select MSN and confirm, e.g. MSN1: Anna.
OK
Enter the start time:
Select the menu item and confirm.
OK
Enter the start time (4-digit).
Enter the end time:
Select the menu item and confirm.
OK
Enter the end time (4-digit).
Press the display key to open the submenu.
Confirm.
OK
Hold down (back to idle status).
Date and Time
87