Entering, Editing Or Deleting Phone Numbers For Sms Centres - Siemens Gigaset CX203isdn Owner's Manual

SMS (text messages)
By default, the "Anny Way" SMS centre has already been entered (number 0190 01504)
and activated as the send centre. This means that, in Germany, you may send text
messages immediately.
You can activate another SMS centre as your send centre. The send centre that was
activated previously is then automatically deactivated.
Receiving an SMS
Text messages can be received via all SMS centres entered, assuming you are registered
with these SMS centres as an SMS recipient (for information about registering, see
page 50).

Entering, editing or deleting phone numbers for SMS centres

You can enter up to ten SMS centres.
Before entering or editing the number, please obtain information about special features
and what the SMS service provider offers.
i
s
Set base
s
Settings
s
Service centres
s
W
either ...
Edit entry
~
W
Save entry
or ...
s
Delete entry
j
If you delete the phone number of a send centre, then you must
◆
activate another SMS centre to be the send centre in order to be able
to continue sending text messages.
i
If your telephone is connected to a PABX, you may have to prefix the
◆
phone number with an access code (number with which you obtain
an exchange line, usually "0") (this depends on your PABX), see
page 59.
48
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm. The phone
OK
number list appears.
Select entry, e.g. <empty>.
Open the submenu.
Changing an entry:
Confirm.
OK
Enter the phone number of the SMS centre.
Press the display key to open the submenu.
Confirm.
OK
Delete an entry:
Select the menu item and confirm.
OK
Hold down (back to idle status).