Sending A Text Message To An E-Mail Address - Siemens Gigaset CX203isdn Owner's Manual

SMS (text messages)
Deleting the entire outgoing message list
This function deletes all the messages in the outgoing message list.
Precondition: You have opened the outgoing message list (page 53).
W
s
Delete list
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
j
Sending or editing text messages in the outgoing message list
Precondition: You have opened a text message in the outgoing message list to read
(page 53).
W
either ...
Write message
or ...
s
Use text
You can now send the message as described on page 52.

Sending a text message to an e-mail address

You ca send a text message to an e-mail address. To do this you should write the
recipient's e-mail address at the start of the text message and send this text message to
the call number of the e-mail service of your SMS send centre.
Entering the e-mail address at the start of the text message
Enter the recipient's e-mail address at the start of your text message. Use a space to
separate the e-mail address from the message text or insert a colon (for other
providers).
Enter the "@" character using the hash key R (press x 2), the colon using the Q key
(press x8), and the space with 1 (press once).
Use W, s Store
Precondition: You are writing a text message (page 51) and the input field is open.
~
54
Open the submenu.
Confirm.
OK
Press the display key to confirm the prompt.
Hold down (back to idle status).
Open the submenu.
Write and send a new text message:
Confirm. The input field is opened (page 51).
OK
You can write a new text message.
Edit and send a stored text message:
Select the menu item and confirm. The input field is
OK
opened with the contents of the stored text
message. You can edit the text.
to save temporarily.
OK
Enter the full e-mail address and end it with a space
or a colon.