Activating/Deactivating Handsfree Dialling; Pre-Assigning The Call Forwarding Destination - Cd (Call Deflection); Setting Up Automatic Call Diversion If A Terminal Is Not Available - Siemens Gigaset CX203isdn Owner's Manual

Activating/deactivating handsfree dialling

If you have activated
you have entered the first digit, the line is seized and handsfree is automatically
activated.
i
s
Settings
s
Dial handsfree
j
Pre-assigning the call forwarding destination – CD (Call Deflection)
The call forwarding destination for incoming calls is pre-set here. This destination
number is offered as a preset for manual forwarding (page 31).
i
s
Set base
s
Settings
~
OK
s
ISDN settings
s
Forward. dest.
~
Save entry
j

Setting up automatic call diversion if a terminal is not available

If your handset is out of the radio range of the base station, the battery is flat, or the
handset has been deactivated, a call will be forwarded an external phone numbers you
specify.
Preconditions:
You have exclusively assigned the handset its own receive MSN (page 94). This
◆
MSN must not be assigned as the receive MSN for any other device, not even the
ISDN bus!
Call diversion can only be set up for one receive MSN on the base station.
◆
, you can dial without lifting the receiver. As soon as
Dial handsfree
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm (‰ = set).
OK
Hold down (back to idle status).
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
W
Enter destination number and open the submenu.
Confirm.
OK
Hold down (back to idle status).
System settings
101