Appendix; Care; Contact With Liquid; Questions And Answers - Siemens Gigaset CX203isdn Owner's Manual

Appendix

Care

Wipe the base station and handset with a damp cloth (do not use solvent) or an
antistatic cloth. Never use a dry cloth. This can cause static.

Contact with liquid

If the handset should come into contact with liquid, on no account switch the device
on. Remove all batteries immediately.
Allow the liquid to drain out of the device, and then pat all parts of the device dry.
Keep the handset with the batteries removed in a warm, dry place for at least 72 hours.
In many cases, you will then be able to use it again.

Questions and Answers

If you have any questions about the use of your phone, you can contact us 24/7 at
www.siemens.com/gigasetcustomercare. You will find the most frequently asked
questions and answers below.
What has happened
when ...
... the base station does not
ring?
... the call units/charges are
not displayed?
... the phone number of the
caller is not displayed even
though CLIP is set?
... the caller list does not
indicate a time for a
message?
... the answering machine
does not record any messages
or has automatically switched
over to 'announce only'?
... you can't dial a phone
number any longer?
... there are no incoming
calls?
!
Possible Cause
The ringer is switched off.
Internal call diversion is set to 0
ring cycles (= immediate call
diversion).
Night service is active.
There are no metering pulses.
Factor per unit = 0.
Calling Line Identification is
blocked.
Date/time are not set.
Its memory is full.
The long distance prefix has
changed.
Call diversion Immediately is
activated.
The MSN has not been assigned
to the internal user.
The authorisation Internal only
is set.
Appendix
Possible solution
Activate (page 112) ringer.
Increase the number of ring
cycles for internal call diversion
(page 98).
Deactivate Night service
(page 86).
Ask your network provider to
transmit the metering pulses.
Set the factor per unit
(page 44).
The caller must ask his network
provider to enable the
identification of his number
(CLI).
Set the date/time (page 84).
Delete old messages
Play back new messages and
delete.
Check the long distance prefix
and correct it (page 106).
Deactivate Immediately call
diversion (page 98).
Determine the receive MSN
(page 94).
Change the authorisation
(page 90).
127