Specifications; General Information - Hach QbD1200 User Manual

Table of contents
Specifications on page 3
General information on page 3
Installation on page 8
User interface and navigation
Startup on page 13

Specifications

Specifications are subject to change without notice.
Specification
Dimensions (W x D x H) 32 x 51 x 41 cm (12.6 x 20.0 x 16.2 in.)
Weight
Enclosure rating
Protection class
Installation category
Power requirements
Altitude
Operating temperature
Relative humidity
Storage temperature
Range
Accuracy
Precision
Oxidation
Detection
Display
Air supply
Certifications
Host I/O
Warranty

General information

In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right to
make changes in this manual and the products it describes at any time, without notice or obligation.
Revised editions are found on the manufacturer's website.
on page 11
Details
14 kg (31 lb)
IP 11
III
I
100/240 VAC, 50/60 Hz, 2A
3048 m (10,000 ft) maximum
10 to 35 ºC (50 to 95 ºF)
0 to 90%, non-condensing
5 to 40 ºC (41 to 104 ºF)
0.4 ppb to 100 ppm TOC
± 2% error (500 ppb)
3% RSD or 3 ppb (the larger value)
UV/persulfate
NDIR
264.2 mm (10.4 in.) color touch screen
High purity air, oxygen or nitrogen; 684.4 kPa (100 psi) maximum air pressure
Conforms to 21 CFR 11, USP <643>, JP <2.59>, EP <2.2.44>, IP, CP, KP and EPA
method 415.3 and Standard Method 5310C; CE mark
Ethernet port
1 year (EU: 2 years)
Operation on page 13
Maintenance on page 18
Troubleshooting on page 19
Replacement parts and accessories on page 21
English 3