Hach QbD1200 User Manual page 9

Install the instrument:
• Indoors in a clean, dry, well-ventilated and temperature-controlled location
• In a location with a flat surface to prevent the unit from movement
• In a location with minimum mechanical vibrations and electronic noise
• In a location with no electromagnetic interferences from equipment such as transmitters, power
switching, etc.
• In an environmental enclosure that supplies protection from precipitation and direct sunlight
• In a location where there is sufficient clearance to make plumbing and electrical connections
• In a location where the display is easily seen by the user
• In a location with a compatible waste container for the drain tube
Plumbing
Add water to the GLS water vessel
Add water to the GLS water vessel as shown in the illustrated steps that follow. Open the instrument
door to do the procedure.
English 9