Alamo MACHETE Product Service Manual page 124

MOTOR P/N 02979881 - DISASSEMBLY
Motor Disassembly: Continued
15.
Remove Gear and Upper Bearing Re-
move upper bearing cone and gear at the same
time. Sit Shaft down over a tube that will support
the gear (item 19). Using press on Shaft (item 14)
, Shaft will slide down through the gear and
bearing at the same time. Make certain to support
Shaft in such a way it will not fall through and hit the
floor. (See Figure 17) Figure 16
16.
Inspect all parts. The Motor is now disas-
sembled. Inspect all of the disassembled part for
wear and damage. Replace worn and/or dam-
aged parts. After cleaning and washing parts keep
them in clean area. If the motor is to remain
disassembled for any period of time, lightly coat
the surfaces of the parts with hydraulic oil and
store them in a closed container to prevent the
parts from rusting or becoming contaminated.
Machete (Service Manual) 04/04
© 2004 Alamo Group Inc.
Press
Splined
Shaft
Tube
Figure 17
124
14
19