(9) Oscillation ON / OFF
The Oscillation ON / OFF command specifies the oscillation of the antenna.
n Command
Oscillation ON
Command
Terminator
"1"
"4"
CR
n Response
Completion Code
"0"
"0"
(10) Test
The Test command is to conduct transmission tests on the communication to
the High-end device. When the Reader Writer receives this command, it
transmits the same command to the High-end device.
n Command
Command
"1"
"0"
(Data 1)
n Response
Completion
Test Data (Same data as the command)
code
"0"
"0"
(Data 1)
Oscillation OFF
Command
"1"
Terminator
CR
Test Data
⋅ ⋅ ⋅
⋅ ⋅ ⋅
Terminator
"5"
CR
Terminator
(Data n)
CR
Terminator
(Data n)
CR
(22/30)