Sony HSR-X206 Operating Instructions Manual page 64

Preparations
turn the Shuttle dial clockwise to validate the
USER password
Note
You cannot set only USER USE to ON. When you
set ADMIN USE to OFF, USER USE is also set to
OFF.
6
Select the lock level for recording operations on
the REC CONTROL line.
USER: Not only administrators, but also users
may perform recording operations.
ADMIN: Only administrators may perform
recording operations. Users are permitted to
perform playback operations only.
Turn the Jog dial to select, and turn the Shuttle dial
clockwise to register your setting.
7
To exit the menu, press he EXIT button.
To activate the security lock
After exiting Menu mode, hold the SHUTTLE HOLD
button pressed for more than 3 seconds.
The security lock with the specified conditions
becomes active, and the LOCK indicator lights.
Note
You cannot activate the security lock when the unit is
in Playback mode.
64
When the security lock is active
The operations are limited depending on the menu
settings, as follows:
ADMIN USER REC
USE USE CONTROL
ON ON ADMIN
ON ON USER
ON OFF ADMIN
ON OFF USER
OFF OFF ADMIN
OFF OFF USER
When a password input is required, a buzzer will
sound, and the password input display will appear on
the monitor screen.
Security lock validity
All operations are locked.
Entering the USER password will
enable playback operations only.
Entering the ADMIN password
will enable all operations.
All operations are locked.
Entering the USER password will
enable playback AND recording
operations. Entering the ADMIN
password will enable all
operations.
Only recording and menu
operations are locked, and
playback operations are allowed.
Entering the ADMIN password
will enable all operations.
Only menu operations are
locked, and recording and
playback operations are allowed.
Entering the ADMIN password
will enable all operations.
All operations are allowed. This
is the default condition.
All operations are allowed.