Table of Contents
Advertisement
Timer Recording
Example:
For recording from 19:00 on Saturday to 6:00 on
Monday
SAT
19:00 **:**
MON
**:** 06:00
Selecting ** on the upper line sets all the columns
up to that for the starting time on the lower line to
** .
When you turn the Shuttle dial, the WEEK
indication on the lower line starts flashing.
Set the day of the week and turn the Shuttle dial,
upon which the ending time starts flashing.
Specify the ending time and subsequent items.
6
When the settings are finished, press the EXIT
button.
Priority of timer recording
If the specified time for recording overlaps with those
on other lines, recording will be made with the
following priority for the overlapped parts:
1 Recording set for a certain day of the week (including
that past midnight)
2 Recording exceeding 24 hours
3 Recording set for DLY
4 External timer recording
Example:
<TIMER SET>
WEEK START STOP
PROGRAM
DLY
05:00 22:00
0FF
SUN
08:00 18:00
P1 ****FPS
SAT
19:00 **:**
*** ****FPS
MON
**:** 06:00
P2 ****FPS
EXT
***** *****
0FF
The FPS or PROGRAM settings with the above
settings are as follows:
The picture quality set on the NORMAL REC MODE
SET display is applied.
38
***
**** ***
OFF
A15FPS
ON
Prioriy
FPS
SET
T3 DLY
20FPS
ON
T1 a certain day
ON
***
T2 over 24 hours
ON
T4 External timer
10FPS
ON
05:00
SAT
3 (20FPS)
08:00
SUN
2 (P2)
06:00
MON
2 (P2)
05:00
TUE to FRI
If an external timer input (the signal to the EXT
TIMER terminal drops 0 V) is detected in the periods
indicated
, recording is performed with the
recording rate of 10 FPS.
Setting holidays
On the days you specify as holidays, timer recording
will be made with the same conditions set for Sunday.
You may select up to 20 days of one year as holidays.
1
Select 1. INITIAL SET from the main menu.
2
Select 4. HOLIDAY SET from the submenu.
The HOLIDAY SET display appears.
<HOLIDAY SET>
1 29-03
2 15-04
3 -----
4 -----
5 -----
6 -----
7 -----
8 -----
9 -----
10 -----
3
Turn the Jog dial to highlight the line to be set and
turn the Shuttle dial clockwise to finalize your
selection.
The month (HSR-X206)/day (HSR-X206P)
column of the selected line flashes.
4
Turn the Jog dial to set to the month (HSR-X206)/
day (HSR-X206P) and turn the Shuttle dial
clockwise to register the setting.
The day (HSR-X206)/month (HSR-X206P)
column of the selected line flashes.
19:00
2 (P2)
18:00
1 (P1)
2 (P2)
22:00
3 (20FPS)
22:00
3 (20FPS)
11 -----
12 -----
13 -----
14 -----
15 -----
16 -----
17 -----
18 -----
19 -----
20 -----
Advertisement
Table of Contents
