Sony HSR-X206 Operating Instructions Manual page 22

Live Picture Monitoring
Masking the screen
You can select the setting of the mask function (ON or
OFF) for each camera individually.
Any camera input with the mask function ON is
displayed in gray on the monitor screen.
The mask function can be set to be automatically
switched for each time period.
To set the mask function to be automatically switched for
each time period, set the time periods in advance.
For setting the time period, see "Setting the Time Period"
on page 59.
1
Set 3. MASK on the SCREEN SET display (
) to ON, then turn the Shuttle dial clockwise.
20
The cursor moves to the MASK SET line.
2
Turn the Shuttle dial clockwise.
The MASK SET menu appears.
<MASK SET>
TIME PERIOD : T-1 (09:00 - 12:00)
CH 01 02
MAIN MON. OFF OFF OFF OFF OFF OFF
MON. 2 OFF OFF OFF OFF OFF OFF
NETWORK OFF OFF OFF OFF OFF OFF
3
Select the time period to be set (T-1, T-2, T-3 or
T-4) using the Jog dial, then turn the Shuttle dial
clockwise.
4
Select the camera input to be set using the Jog dial,
then turn the Shuttle dial clockwise.
5
Select ON or OFF with the Jog dial, then turn the
Shuttle dial clockwise.
The cursor moves to the next camera input.
6
Repeat steps 4 and 5 for each camera input for
each monitor.
To mask the live picture to be monitored via a
network, set the NETWORK masking to ON (ID1
users only).
22
page
03 04 05 06
Notes
• When you set the MAIN or MON2 masking to
ON, the playback picture is also masked. (You
cannot monitor the playback picture.)
To monitor the playback picture, set the mask
setting to OFF.
• Masking via a network is effective only for ID1
users. The ID2 and ID3 users can monitor all the
channels in desired mode.
7
If multiple time periods have been specified,
perform the settings for other periods.
If T-1 is (00:00 - 00:00) and T-2, T-3, and T-4 are
(--:-- - --:--), the recorder operates according to the
settings for T-1 all day long. You need not make
the ON/OFF setting for T-2, T-3 and T-4 as no
definition has been made for them.
When the settings are completed
Press the EXIT button to exit the menu.
Setting the color level
You can set the color level (1 to 10) for each camera
input. Select AUTO for automatic adjustment.
1
Select 4. COLOR LEVEL SET on the SCREEN
SET display (
page 20
The COLOR LEVEL SET display is superimposed
to the camera picture being selected.
2
Press the INPUT SELECTOR button to select the
camera input for which the color level to be set.
3
Turn the Jog dial to set the color level (1 to 10,
AUTO), then turn the Shuttle dial clockwise to
register your setting.
4
Repeat steps 2 and 3 for each camera input to be
set.
When the setting is completed
Press the EXIT button to exit the menu.
).