Sony HSR-X206 Operating Instructions Manual page 58

Preparations
2
Turn the Jog dial to set to USE and turn the Shuttle
dial clockwise.
3
Set when to switch to summer (daylight savings)
time on the ON line.
WEEK: What day of which (first, second, third,
fourth, or last) week in the specified month on
which to switch
MONTH: Month in which to switch
TIME: Time (hours:minutes) when to switch
4
Similarly set when to return to the standard time on
the OFF line.
When the settings are completed
Press the EXIT button to exit the menu.
Adjusting the time using the CLOCK IN/
OUT terminals
To adjust the built-in clock of this unit and/or the
clocks of another connected HSR-X206/X206P units
using the CLOCK IN/OUT terminals on the rear panel,
set the hours and minutes for ADJUST. TIME of EXT.
CLOCK SET.
The output at the CLOCK OUT terminal will drop to
0 V at the time you specify here.
When the CLOCK IN terminal is short-circuited to the
C terminal, the built-in clock will be set to the time
you specify here, and the output at the CLOCK OUT
terminal will drop to 0 V at the same time.
When the settings are completed
Press the EXIT button to exit the menu.
58
Connection example: When adjusting the time
by using an external switch
HSR-X206/X206P
ALL RESET
HSR-X206/X206P
ALL RESET
HSR-X206/X206P
ALL RESET
External switch
CLOCK
C IN
ALARM
ALARM IN
RESET FULL
-AC IN
C 1 2 3 4 5 6 C C
SENSOR ALARM OUT ALARM
OUT
NON REC EXT TIMER
CLOCK WARNING
C R1 R2 IN OUT FULL C
C
CLOCK
OUT
CLOCK
C IN
ALARM
ALARM IN
RESET FULL
-AC IN
C 1 2 3 4 5 6 C C
SENSOR ALARM OUT ALARM
OUT
NON REC EXT TIMER
CLOCK WARNING
C R1 R2 IN OUT FULL C
C
CLOCK
OUT
CLOCK
C IN
ALARM
ALARM IN
RESET FULL
-AC IN
C 1 2 3 4 5 6 C C
SENSOR ALARM OUT ALARM
OUT
NON REC EXT TIMER
CLOCK WARNING
C R1 R2 IN OUT FULL C