Table of Contents
Advertisement
Preparations
<ALARM SEARCH>
NO
DATE
TIME
0108 12-20 05:37 04
0107 12-19 14:23 01
0106 12-16 11:13 02
0105 12-16 16:13 03
0104 12-15 10:13 01
0103 12-13 15:19 06
0102 12-13 11:15 01
0101 12-13 11:13 06
MOVE:JOG SELECT:SHUTTLE
When you turn the Shuttle dial clockwise, the unit
enters PLAY mode for the selected event; however the
picture cannot be played back, and audio is muted.
This condition is common to Alarm thumbnail search,
Time date search, and Activity detection search.
Example: Alarm thumbnail search screen
DELETED
0108
0107
DELETED
0105
0104
DELETED
0102
0101
For the Archive area search, the AUTO DELETE
setup is not applied. So it is possible to view the
pictures even after the specified retention period has
expired.
Notes
• Network operation
Operation is the same between network operation and
the unit operation.
• Masking
Once the Auto Delete function is applied, any masked
pictures and audio cannot be played even if you
change AUTO DELETE setup. Also, they cannot be
copied to Memory Sticks.
• Influence of power OFF
If a no-power condition occurs, such as just turning
the power OFF or the power outage, the data-
retention period may be shortened. Each time power
is shut off the period may shortened by up to 10
minutes.
62
CH
TOTAL ALARMS
00234
DELETED
DELETED
DELETED
0106
DELETED
DELETED
0103
DELETED
DELETED
0100
On-Screen Data Selection
You may independently turn on/off the on-screen data
superimposed on the images on the monitor screen or
specify titles.
Use the submenu 1. DISPLAY SET of the main menu
3. GENERAL SET.
<DISPLAY SET>
DATE
TIME
QUALITY
AUDIO
ALARM COUNT
ALARM TYPE
TITLE
VIDEO LOSS
DATE, TIME, QUALITY, AUDIO, ALARM
COUNT, ALARM TYPE, TITLE
Specify whether to superimpose each item on the
images on the monitor screen.
For details on these items, see "On-Screen Data" on page
14.
VIDEO LOSS
Specify whether to indicate a message on the monitor
if the signal from a camera is lost during live
monitoring.
Changing the settings
1
Select 3. GENERAL SET from the main menu.
2
Select 1. DISPLAY SET/VIDEO LOSS from the
submenu.
The DISPLAY SET/VIDEO LOSS display
appears.
3
Highlight the item to be set, then turn Shuttle dial
clockwise.
The current setting flashes.
4
Turn the Jog dial to change the ON/OFF setting,
then turn the Shuttle dial clockwise to register your
setting.
: ON
: ON
: ON
: ON
: ON
: ON
: ON
: TEST
Advertisement
Table of Contents
