Table of Contents
Advertisement
3
Turn the Shuttle dial clockwise when selecting the
destination of the data on the COPY TO line.
ARCHIVE AREA: To copy the data from the
normal or alarm recording area to the archive
area.
COMPACT FLASH: To copy the data to a
Compact Flash, etc.
Select the destination with the Jog dial and turn the
Shuttle dial clockwise to finalize your selection.
The HOW MANY line is highlighted.
4
Turn the Shuttle dial clockwise to specify the
quantity of images to be copied on the HOW
MANY line.
The figure input column flashes.
Set the number with the Jog dial and turn the
(1)
Shuttle dial clockwise.
The unit column flashes.
(2)Set the unit with the Jog dial and turn the
Shuttle dial clockwise to register the setting.
PICTURES: To specify the number in units of
picture frames
SECONDS: To specify the number in units of
seconds
MINUTES: To specify the number in units of
minutes
START is highlighted.
5
Turn the Shuttle dial clockwise.
Copying begins.
When copying is completed, the indicator of the
COPY button goes dark.
To stop copying in progress
Press the COPY button. The copy operation is
canceled.
When the archive area becomes full
You can clear all the data in the area using the
submenu 2. RECORDING AREA SET of the main
menu 2. RECORD SET.
You cannot delete specific events only.
Notes
• When you copy to Compact Flash cards, the
maximum number of cards for continuous copying is
40,000. Copying is interrupted when the count
reaches 40,000 after a copying operation is started.
To copy to 40,001 cards or more, copy to fewer than
40,000 cards per operation.
• When copying to the archive area, audio data are not
copied.
To format a Compact Flash card
By formatting a memory card, you can erase all
previous data in a Compact Flash card to use.
Use the copy set display for formatting.
1
Insert the Compact Flash card to be formatted into
the slot of this unit.
2
Set the unit to Still-Picture mode and press the
COPY button.
The copy set display is superimposed on the
image.
3
Turn the Jog dial to highlight FORMAT
COMPACT FLASH and turn the Shuttle dial
clockwise.
A confirmation message appears.
4
Turn the Jog dial to choose YES then turn the
Shuttle dial clockwise.
Formatting of the Compact Flash card begins.
The progress status is displayed during formatting.
When formatting is completed, a completion
message is displayed, and the indicator of the
COPY button goes dark.
41
Advertisement
Table of Contents
