Removing Stand; Appendix; Removing The Stand; Setting Tv On Wall - Sharp AQUOS LC-42D64U Operation Manual

Appendix
Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
® Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching the stand
• Before performing work make sure to turn off the TV,
• Before performing work spread cushioning over the base area to lay the TV on, This will prevent it from being
damaged,
"-1 _ - Hex key _ _G=
r_ r_
Unfasten the four screws used to secure the stand in
alace.
2
Detach the stand from the TV, (Hold the stand so it
will not drop from the edge of the base area,)
., To attach the stand, per[orm the above steps in reverse order.
• This TV should be mounted on the wall only with the AN-52AG4 (SHARP} wall mount bracket. The use of other wall
mount brackets may result in an unstable installation and may cause serious injuries.
® installing the TV requires special skill that should only be performed by qualified service personnel. Customers
should net attempt to de the work themselves, SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualified service professional about using an optional AN-52AG4 bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
f
Hanging on the wall
AN-52AG4 wall mount bracket.
(See the bracket instructions for details.)
Vertical mounting Angular mounting
About setting the TV angle
0/5/1C
Detach the cable clamp on the rear of the TV when ushqg the optional mount bracket.
., To use this TV mounted on a wall, first remove the adhesive tape at the 4 locations on the rear of the TV, and then use the
screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
(D- 58