Useful Adjustment Settings; Auto Sync. Adjustment (For Analog Pc Input Mode Only); Fine Sync. Adjustment - Sharp AQUOS LC-42D64U Operation Manual

Useful adjustment settings
For automatically adjusting the PC image.
I/
FREEZE MENU
0 @
E6T R_.
Press MENU to display the MENU screen, and
then press _11/1_ to select "Setup".
Press A/V to select "Auto Sync.", and then
press ENTER.
Press _1/1_ to select "Yes", and then press
ENTER.
,) Auto Sync. starts and "Now adjusting the image."
displays.
!!
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
Press MENU to display the MENU screen, and
then press 41/1_ to select "Setup".
Press A/Y to select "Fine Sync.", and then
press ENTER.
Press A/V to select the specific adjustment
item.
Press MENU to exit.
,, When Auto Sync. is successful, "Completed" displays. If
not, Auto Sync. failed.
,, Auto Sync. may fail even if "Completed" displays.
,, Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
Be sure to connect the PC to the TV and switch it on
bdore starting Auto Sync.
R-Pos, Centers the image by moving it to the left
or right.
V-Pos, Centers the image by moving it up or
down.
Clock Adjust when the image flk_'kers with vertical
stripes.
Phase Adjust when characters have low contrast
or when the image flickers.
Press 4/1_ to adjust the item to your desired
position.
Press MENU to exit.
,, For resetting all Fine Sync. adjustment items to the factory
preset values, press A/T to select "Reset", and then
press ENTER.
,' It is not necessary to adjust the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected.
,, The default cursor position may not be in the center,
because the screen position variable ranges may be
asymmetrk_'al.
,, The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
(D- 32