Simple Button Operations For Changing Channels - Sharp AQUOS LC-42D64U Operation Manual

Watching
TV
Method t
Using OH A/V on the remote control unit or on the
TV.
You can change channels in several ways. Method 2
INPUT
©
CH
@A
@v
VOL
1 Press FLASHBACK to switch to the previously
tuned channel.
2 Press FLASHBACK again to switch back to the
currently tuned channel.
FLASHBACK will not work if no channel has been
changed after the TVis turned on.
Method 3
Using remote control buttons 0-9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.
To select a 1 or 2-digit channel number
(e. g., Channel 5}:
Press 5_ENT
INPUT FLASiCBACK
O@
VOL CH
FREEZE MENU
C®9
-- FAVORITECH --
®®@@
AQUOS
., When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
To select a 3-digit channel number
(e. g., Channel 115}:
Press t_1 _5_ENT
To select a 4-digit channel number
(e. g., Channel 22.1}:
Press 2 _2_ * (DOT) _I_ENT
When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
., If you push "0" by itself, nothing will happen.
Complete the above steps within a few seconds.
When you enter 0-9 and - (DOT), channel selection will be
made if there is no operation within a few seconds.
@- 18