Av Mode; Input Signal (For Analog Pc Input Mode Only) - Sharp AQUOS LC-42D64U Operation Manual

Useful adjustment settings
AV MODE gives you 7 viewing options to choose from
to best match the surrounding environment of the W,
which can vary due to factors like room brightness,
type of program watched or the type of image input
from external equipment.
FREEZE MENU
0 @
-- FAVORITECH --
6)@@@
R_0P _N FA_TF
s SP
Press AV MODE.
• Current AV MODE dbplays.
Press AV MODE again before the mode
displayed on the screen disappears.
* The mode changesas shown below.
When the input source is TV, iNPUT 1, 2 or 3 terminals
(Example}
-t 4_
STANDARD For a highly defined image in a normal
lighting
[Enhanced Picture Contrast: on]
MOVIE For a movie
[Enhanced Picture Contrast: ofq
GAME Lowers image brightness for easier vbwing
[Enhanced Picture Contrast: ofq
PC For PC
[Enhanced Picture Contrast: ofq
xvYOC* Supports the xvYCC international standard
for wide color space.
[Enhanced Picture Contrast: off1
USER Allows the user to customize settings as
desired. You can set the mode for each
input source.
[Enhanced Picture Contrast: off1
DYNAMIC Changes the image and sound settings to
(Fixed} the factory preset values. No adjustments
are allowed.
[Enhanced Picture Contrast: on]
DYNAMIC For a clear-cut image emphasizing high
contrast, useful for sports viewing
[Enhanced Picture Contrast: on]
The xvYCC signal allows you to experience colors that
conventional color signals cannot reproduce.
4,
When the input source is iNPUT 4, 5, 6 or 7 terminals
(Example}
* You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for INPUT 1 .)
* "Enhanced Picture Contrast" technology detects the source
video characteristics and smoothly adjusts the screen
brightness accordingly to realize deeper black levels.
* "xvYCC" can only be selected when an xvYCC signal is
input using INPUT 4 to 6.
(D- 38
Some input signals may have to be registered manually
to display properly.
The pair of input signals (resolutions) in the list below
are not distinguishable when received. In such case,
you have to set the correct signal manually. After
setting once, it will display when the same signal
(resolution) is input again.
1024 × 76B 1360 × 768
• You can only select the "input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
Press MENU to display the MENU screen, and
then press _/_ to select "Setup".
Press A/Y to select "Input Signal", and then
press ENTER,
Press A/Y to select the desired input signal
on the display.
Press MENU to exit.