Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

Sharp LC LC-52D64U Operation Manual

Sharp operation manual liquid crystal television lc-42d64u, lc-46d64u, lc-52d64u.

 
LC-42D64U
LC-46D64U
LC-52D64U
IMPORTANT
: Please read this operation manual before starting operating the equipment.
IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN

Summary of Contents

  • Page 1

    LC-42D64U LC-46D64U LC-52D64U IMPORTANT IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo. LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN : Please read this operation manual before starting operating the equipment.

  • Page 3: Important Information

    LIQUID CRYSTAL TELEVISION • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. • Menu items that are not selectable are grayed out. • The examples used throughout this manual are based on the LC-42D64U model.

  • Page 4: Trademarks

    DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-42D64U/LC-46D64U/LC-52D64U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 5: Dear Sharp Customer, Important Safety Instructions

    DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.

  • Page 6

    IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. •...

  • Page 7

    IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

  • Page 8: Supplied Accessories, Quick Reference, Attaching The Stand

    • Always use the AC cord supplied with the TV. • AC cord enclosed in this product is for 110-125V. In using it on the 125-240V AC, please consult to the following. SHARP ELECTRONICS CORPORATION, LATIN AMERICA GROUP 6100 Blue Lagoon Drive, Suite 150, Miami, Florida 33126, U.S.A.

  • Page 9

    QUICK REFERENCE STOP! To safely remove the AQUOS television from the box • It's best to use 2 people to remove the AQUOS television for stability. • Lift onto installation location as the diagram illustrates. Ventilation & Cleaning Tips Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near water.

  • Page 10

    IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS. IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP. Please refer to the BASIC ADJUSTMENT SETTINGS SECTION for EZ Setup and basic channel setup functions and USING EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc.) in your...

  • Page 11: Table Of Contents

    Contents IMPORTANT INFORMATION ... 1 Trademarks ... 2 DEAR SHARP CUSTOMER ... 3 IMPORTANT SAFETY INSTRUCTIONS ... 3 Supplied accessories ... 6 QUICK REFERENCE ... 6 Attaching the stand ... 6 Contents ... 9 Part names ...10 TV (Front) ...10 TV (Rear/Side) ...10...

  • Page 12: Part Names, Tv (front), Tv (rear/side)

    Part names TV (Front) NOTE *OPC: Optical Picture Control (See page 26.) **See page 16 for TV status indicator. TV (Rear/Side) INPUT 3 terminals HDMI terminal (INPUT 4) USB terminal Antenna/Cable in INPUT 2 terminals POWER button MENU button INPUT button Channel buttons Volume buttons (VOL+/–)

  • Page 13: Remote Control Unit

    Part names Remote control unit NOTE • When using the remote control unit, point it at the TV. TV POWER: Switch the TV power on or enters standby. (See page 16.) DISPLAY: Display the channel information. SOURCE POWER: Turns the power of the external equipment on and off.

  • Page 14: Preparation, Using The Remote Control Unit, Cautions Regarding The Remote Control Unit, Antennas

    Preparation Using the remote control unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. Cautions regarding the remote control unit •...

  • Page 15: Connecting A Blu-ray Disc Player, Hd-dvd Player Dvd Player Or A Digital Tv Stb (air Or Cable)

    Preparation You can connect many types of external equipment to your TV like a Blu-ray disc player, HD-DVD player, DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 30 and 31.) CAUTION •...

  • Page 16: Connecting A Vcr, Game Console Or Camcorder, Using Digital Audio Output

    Preparation Connecting a VCR, game console or camcorder A VCR, game console, camcorder and other audiovisual equipment can be conveniently connected using the INPUT 1, 2 and 3 terminals. When using S-VIDEO cable. VCR/Game console/ Camcorder S-VIDEO cable (commercially available) AUDIO cable (commercially available) When using composite cable.

  • Page 17: Connecting Hdmi Equipment, Connecting A Pc, Pc Compatibility Chart

    Preparation Connecting HDMI equipment You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment. HDMI equipment NOTE • When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 6. •...

  • Page 18: Watching Tv, Turning On The Power, Turning Off The Power

    Watching TV Simple operations for watching a TV program POWER OPC indicator indicator SLEEP indicator TV POWER (On/Standby) Turning on the power Press POWER on the TV, or TV POWER on the remote control unit. • POWER indicator (Green): The TV is on. (After a few seconds, a window appears with sound.) NOTE Power...

  • Page 19: Initial Setup

    Watching TV Initial setup When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels where you live. Perform the following steps before you press TV POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 8.) 2.

  • Page 20: Simple Button Operations For Changing Channels

    Watching TV Simple button operations for changing channels You can change channels in several ways. Method 1 Using CH r/s on the remote control unit or on the Method 2 1 Press FLASHBACK to switch to the previously tuned channel. 2 Press FLASHBACK again to switch back to the currently tuned channel.

  • Page 21: Simple Button Operations For Changing Volume/sound

    Watching TV Simple button operations for changing volume/sound ■ Changing the volume You can change the volume on the TV or on the remote control unit. ■ Using VOLk/l • To increase the volume, press VOLk. • To decrease the volume, press VOLl. Volume adjustment NOTE on the TV operates the same as VOL k/l on...

  • Page 22: Setting Mts/sap Stereo Mode, Setting Digital Broadcasting Audio Mode

    Watching TV Setting MTS/SAP stereo mode The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP).

  • Page 23: Basic Adjustment Settings, Menu Operation Buttons, On-screen Display

    Basic adjustment settings Menu operation buttons ■ Using the remote control Use the following buttons on the remote control to operate the menu. MENU: Press to open or close the menu screen. a/b/c/d: Press to select a desired item on the screen or adjust a selected item.

  • Page 24: Menu Items For Tv/input 1/2/3, Menu Items For Hdmi/pc-in

    Basic adjustment settings Menu items for TV/INPUT 1/2/3 Picture OPC ... Page 26 Backlight ... Page 26 Contrast ... Page 26 Brightness ... Page 26 Color ... Page 26 Tint ... Page 26 Sharpness ... Page 26 Advanced C.M.S.-Hue ... Page 27 C.M.S.-Saturation ...

  • Page 25: Ez Setup, Channel Setup

    Basic adjustment settings EZ Setup You can run EZ Setup again, even after setting up the preset channels. Language setting Select from among 3 languages: English, French and Spanish. Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “EZ Setup”, and then press ENTER.

  • Page 26: Antenna Setup - Digital

    Basic adjustment settings Channel memory setting Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “CH Setup”, and then press ENTER. • If you already set the Secret No., input the 4-digit secret number here.

  • Page 27: Favorite Channel Setting

    Basic adjustment settings Favorite channel setting This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. Using FAVORITE CH on the remote control unit Select the channel you want to register as a favorite channel.

  • Page 28: Picture Adjustments, Opc Setting

    Basic adjustment settings Picture adjustments Adjusts the picture to your preference with the following picture settings. Press MENU to display the MENU screen, and then press c/d to select “Picture”. Press a/b to select a specifi c adjustment item. Press c/d to adjust the item to the desired level.

  • Page 29: Advanced Picture Adjustments, C.m.s. (color Management System), Color Temperature, Active Contrast, Fine Motion, I/p Setting

    Basic adjustment settings Advanced picture adjustments This TV provides various advanced functions for optimizing the picture quality. Press MENU to display the MENU screen, and then press c/d to select “Picture”. Press a/b to select “Advanced”, and then press ENTER. Press a/b to select a specifi...

  • Page 30: Film Mode (3:2 Pull-down), D-y/c, Monochrome, Range Of Opc, Sound Adjustment

    Basic adjustment settings Film Mode (3:2 pull-down) Automatically detects a fi lm-based source (originally encoded at 24 frames/second), analyzes it then recreates each still fi lm frame for high-defi nition picture quality. Selected item Description Detects, analyzes, converts fi lm source Normal viewing mode NOTE •...

  • Page 31: Surround, Bass Enhancer, Power Control

    Basic adjustment settings Surround Surround function allows you to enjoy realistic “live” sound. Press MENU to display the MENU screen, and then press c/d to select “Audio”. Press a/b to select “Surround”, and then press ENTER. Press c/d to select “On”, and then press ENTER.

  • Page 32: Using External Equipment, Displaying An External Equipment Image, Input Select

    Using external equipment Displaying an external equipment image To view external source images, select the input source from INPUT on the remote control unit or on the TV. Press INPUT. • A list of selectable sources appears. INPUT SOURCE INPUT1 INPUT2 INPUT3 INPUT4...

  • Page 33: Displaying An Image From Hdmi Equipment, Input Skip

    Using external equipment Displaying an image from HDMI equipment To watch an HDMI or PC-IN equipment image, select “INPUT4”, “INPUT5” or “INPUT 6” from “INPUT SOURCE” menu using INPUT on the remote control unit or on the TV. INPUT SOURCE INPUT1 INPUT2 INPUT3...

  • Page 34: Useful Adjustment Settings, Fine Sync. Adjustment

    Useful adjustment settings Auto Sync. adjustment (for Analog PC input mode only) For automatically adjusting the PC image. Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “Auto Sync.”, and then press ENTER.

  • Page 35: Image Position, Language Setting, Reset

    Useful adjustment settings Image position For adjusting a picture's horizontal and vertical position. Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “Position”, and then press ENTER. Press a/b to select “H-Pos.” or “V-Pos.”. Example H-Pos.

  • Page 36: Input Label, Sleep Timer

    Useful adjustment settings Input Label Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Press INPUT to select the desired input source. Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “Input Label”, and then press ENTER.

  • Page 37: View Mode For 4:3 Programs, View Mode For Hd Programs

    Useful adjustment settings View Mode for 4:3 Programs Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. Example View Mode Side Bar S.

  • Page 38: View Mode For Pc Input Mode

    Useful adjustment settings View Mode for PC input mode You can select the screen size. NOTE • Connect the PC before making adjustments. (See page 15.) • Selectable screen size may vary with input signal type. Press VIEW MODE. • The View Mode menu displays. Example View Mode Normal...

  • Page 39: Advanced Option Settings, Audio Only, Digital Noise Reduction, Program Title Display, Output Select, Color System

    Useful adjustment settings Advanced Option settings Perform the following steps to set the Option menu items on this page. Press MENU to display the MENU screen, and then press c/d to select “Option”. Press a/b to select a specifi c adjustment item, and then press ENTER.

  • Page 40: Input Signal (for Analog Pc Input Mode Only)

    Useful adjustment settings AV MODE AV MODE gives you 7 viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment.

  • Page 41: Closed Captions And Digital Closed Captions

    Useful adjustment settings Closed Captions and Digital Closed Captions Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider.

  • Page 42: Caption Setup, Digital Caption Information

    Useful adjustment settings Caption Setup This function allows you to adjust the closed caption screen appearance to suit your preference. Press MENU to display the MENU screen, and then press c/d to select “Option”. Press a/b to select “Caption Setup”, and then press ENTER.

  • Page 43: Secret Number Setting For Parental Control

    Useful adjustment settings Secret number setting for parental control Allows you to use a secret number to protect certain settings from being accidentally changed. IMPORTANT: Three conditions must be met to enable the V-Chip (see pages 41 to 47): 1 Secret No. is registered. 2 V-Chip/V-Chip (DTV Only) settings have been made.

  • Page 44

    Useful adjustment settings Changing the secret number Allows you to change your current secret number. Repeat steps 1 and 2 in Setting a secret number. • The secret number setting menu displays. Input the 4-digit secret number by using 0–9. Press a/b to select “Secret No.”, and then press ENTER.

  • Page 45: Parental Control (setting V-chip Level)

    Useful adjustment settings Parental control (setting V-CHIP level) V-CHIP is an electronic fi ltering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable.

  • Page 46

    Useful adjustment settings Voluntary movie rating system (MPAA) Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “Parental CTRL”, and then press ENTER. • The secret number setting menu displays only when “Secret No.”...

  • Page 47

    Useful adjustment settings Canadian Rating Systems • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.

  • Page 48

    Useful adjustment settings Canadian English ratings Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “Parental CTRL”, and then press ENTER. • Secret number setting menu displays only when “Secret No.” is set. (See page 41.) •...

  • Page 49: How To Temporarily Release The V-chip Block, Reactivating The Temporarily Released V-chip Block, Digital Setup

    Useful adjustment settings How to temporarily release the V-CHIP BLOCK When the V-CHIP BLOCK is working and censors a broadcast, “V-CHIP HAS BEEN ACTIVATED.” displays. Press ENTER while the V-CHIP is working, and then the secret number setting menu displays. Input the 4-digit secret number by using 0–...

  • Page 50: Software Update

    USB memory device with the update fi le into the USB terminal on the TV. Regarding how to obtain the software update fi le, please call 1-800-BE-SHARP. CAUTION • Do not remove the USB memory device or unplug the AC cord while the software is being updated.

  • Page 51

    Useful adjustment settings Press ENTER to start updating. • The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord. The picture will temporarily go dark until the Software Update display appears.

  • Page 52: Other Viewing Options, Freezing Images, Presetting Remote Control Function

    Other viewing options Freezing images Allows you to capture and freeze a moving image that you are watching. Press FREEZE. • A moving image is captured. Press FREEZE again to cancel the function. NOTE • When this function is not available, “No displaying still image available.”...

  • Page 53

    Other viewing options Manufacturer codes REMOTE CONTROL CODE VCR BRAND DVD/LD BRAND NUMBER CATV/SAT BRAND NOTE • Numbers marked with * are SAT codes, all others are CATV codes. AUDIO BRAND REMOTE CONTROL CODE NUMBER REMOTE CONTROL CODE NUMBER REMOTE CONTROL CODE NUMBER...

  • Page 54

    Other viewing options ■ Cable control buttons When the FUNCTION is set to CBL/SAT, the cable converter connected to the TV can be operated using 1 to 4. 1 SOURCE POWER Turns the cable converter power on and off. 2 0–9 Press a button (or buttons) that corresponds to the channel that you wish to watch.

  • Page 55

    Other viewing options ■ VCR control buttons The remote control unit button will function as follows when the FUNCTION of the remote control unit is set to VCR. • Press INPUT until the input connected to the VCR is selected. The following 1 to 8 can be used to control the VCR.

  • Page 56: Controlling Hdmi Equipment Using Aquos Link

    Other viewing options Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blue-ray Disc equipment, AV amplifi er, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certifi ed cables to the TV, you can control a recorder or AV amplifi...

  • Page 57

    Other viewing options Auto Power On If this is activated, the One Touch Play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. Press MENU to display the MENU screen, and then press c/d to select “Option”.

  • Page 58

    Other viewing options Selecting Media Type for CEC-compatible Recorder You can switch the media (HDD or DVD) for playback or recording on the AQUOS LINK-compatible recorder. Press OPTION to display the AQUOS LINK MENU screen. Press a/b to select “Media change”, and then press ENTER.

  • Page 59

    Other viewing options One Touch Playback AQUOS LINK allows you to operate the HDMI- connected equipment with one remote control. Press d to start playing back a title. • The last played program is played back. You can use following buttons during broadcast viewing. Buttons Description SOURCE...

  • Page 60: Appendix, Removing The Stand, Setting The Tv On The Wall

    Setting the TV on the wall CAUTION • This TV should be mounted on the wall only with the AN-52AG4 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

  • Page 61: Troubleshooting, Troubleshooting-digital Broadcasting

    Appendix Troubleshooting Problem • No power • Unit cannot be operated. • Remote control unit does not operate. • Picture is cut off/with sidebar screen. • Strange color, light color, or color misalignment • Power is suddenly turned off. • No picture •...

  • Page 62: Rs-232c Port Specifi Cations

    Appendix RS-232C port specifi cations PC control of the TV • When a program is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/AV) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing.

  • Page 63

    Appendix Response code format Normal response Return code (0DH) Command table • Commands not indicated here are not guaranteed to operate. CONTROL ITEM COMMAND PARAMETER POWER ON COMMAND SETTING R S P W P O W R POWER SETTING INPUT SELECTION A TOGGLE T G D INPUT1-7 A V D...

  • Page 64: Specifi Cations, Optional Accessory

    The dimensional drawings are shown on the inside back cover. • As part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units.

  • Page 65

    CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “EZ Setup”, “CH Setup”, “Parental CTRL” or “Reset”, and the Secret number input screen displays.

  • Page 66: Information On The Software License For This Product

    The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.

  • Page 67: Calling For Service, Limited Warranty

    WHICH VARY FROM STATE TO STATE. The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are permitted.

  • Page 69

    Dimensional drawings LC-42D64U (933.2) LC-46D64U (1023.4) (1004) (400) (1101) (400) Unit: inch (mm) (550) (125) (95) (325) (550) (95) (125) (325)

  • Page 70

    Dimensional drawings Unit: inch (mm) LC-52D64U (1237) (1157.0) (550) (400) (124) (95) (325)

  • Page 71

    SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION Printed in Mexico Imprimé au Mexique Impreso en México TINS-D194WJZZ 07P07-MX-NM...

Comments to this Manuals

Symbols: 0

Latest comments:

  • Kim rutledge Sep 18, 2014 06:14:
    I'm trying to hook my moms TV up to CLEAR TV digital it asks to
    Use the TV remote n set TV's input to ANTENNA. Well I can't find how to do that in the manual? Can you help me?
×

Select the desired size and copy embed code

Copy your embed code and put on your site: