How To Temporarily Release The V-Chip Block; Reactivating The Temporarily Released V-Chip Block; Digital Setup; Audio Setup - Sharp AQUOS LC-42D64U Operation Manual

Useful adjustment settings
When the V-CHIP BLOCK is working and censors a
broadcast, "V-CHIP HAS BEEN ACTIVATED." displays.
Press ENTER while the V-CHIP is working,
and then the secret number setting menu
displays.
Input the 4-digit secret number by using 0-
9. At this time V-CHIP BLOCK temporarily
releases.
You can reactivate the temporarily released V-CHIP
BLOCK as shown below.
Method 1:
Select "Status" setting from the Parental CTRL menu
to reactivate BLOCK. (See page 41 .)
Method 2:
Select "V-Chip" setting ("MPAA", "TV Guidelines",
"Can. English Ratings" or "Can. French Ratings")
from the Parental CTRL to reactivate BLOCK. (See
pages 44 and 47.)
Method 3:
Switch off the TV power.
Performing any of the three above will activate the V-CHIP
BLOCK.
This setting allows you to optimize the settings of
Digital broadcasting.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the W. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
Press MENU to display the MENU screen, and
then press _11/_ to select "Digital Setup".
Press A/Y to select "Audio Setup", and then
press ENTER.
Press A/Y to select "PCM" or "Dolby Digital",
and then press ENTER.
PCM The optical output terminal outputs audio
signal in PCM form. Ifyour digital audio
systemdoes not support Dolby Digital,
select "PCM".
Doiby Digital The optical output terminal outputs audio
signal in Dolby Digitalform. It reproduces
sound from surround program of digital.
Press MENU to exit.
Press MENU to display the MENU screen, and
then press _/l_ to select "Digital Setup".
Press A/Y to select "Identification", and then
press ENTER.
The current version of the TV software is
displayed.
(D- 47