Displaying An Image From Hdmi Equipment; Input Skip - Sharp AQUOS LC-42D64U Operation Manual

Using external equipment
To watch an HDMI or PC-IN equipment image,
select "INPUT4", "INPUTS" or "INPUT 6" from
"INPUT SOURCE" menu using iNPUT on the
remote control unit or on the TV.
...e INPUT4
Press MENU to display the MENU screen, and
then press _11/1_to select "Option".
Press A/Y to select "HDMI Setup", and then
press ENTER.
This setting allows you to skip the HDMI or PC-IN Input
on the Input Selection operation.
Press MENU to display the MENU screen, and
then press 41/1_ to select "Setup".
Press A/Y to select "Input Skip", and then
press ENTER.
Press A/V to select the Input (INPUT 4,
INPUT 5, INPUT 6 or INPUT 7) you wish to
skip, and then press ENTER.
Input 4 (HDMI)
Press 4/1_ to select "Yes", and then press
ENTER.
Press MENU to exit.
Press A/V to select the desired item, and
then press ENTER.
Press 41/_ to select the desired setting, and
then press ENTER.
Auto View
Audio
Select
Enable
Disable
Digital
Analog
Set whether or not to use
View Mode based on signal
recognition, including an HDMI
signal.
Select "Digital" for an audio
signal via the HDMI terminal.
Select "Analog" for an audio
signal via the R-AUDIO -L
terminal.
Press MENU to exit.
., Refer to your external equipment operation manual for the
signal type.
., "Audio Select" is only available for iNPUT 6.
., When connecting an HDMI-DVI conversion adapted(sable
to the HDMI terminal, the image may not come in clearly.
_- 31