Connecting Hdmi Equipment; Displaying An Image From Hdmi Equipment - Sharp LC32D41U - 32" LCD TV Operation Manual

Using external equipment

Connecting HDMI equipment

You can use the INPUT 3 or INPUT 4 terminal when connecting HDMI equipment.
Displaying an image from HDMI
equipment
To watch an HDMI equipment image,
1
select "INPUT3" or "INPUT4" from "INPUT
SOURCE" menu using INPUT on the remote
control unit or on the TV. (See page 36.)
INPUT SOURCE
Press MENU and the MENU screen displays.
2
Press c / d to select "Option".
3
Press a / b to select "HDMI Setup", and then
4
press ENTER.
[ Option ... HDMI Setup ]
MENU
Option
Audio Only
Digital Noise Reduction
HDMI Setup
Output Select
HDMI cable
(Commercially available)
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
[Low]
[Fixed]
When using an HDMI-DVI
conversion cable, input the
audio signal to AUDIO terminal
of INPUT 4.
HDMI equipment
Press a / b to select the desired item, and
5
then press ENTER.
Press a / b / c / d to select the desired
6
setting, and then press ENTER.
HDMI
Selectable
Setup
items
items
Signal RGB/YCbCr 4:4:4/
Type YCbCr 4:2:2
Auto View Enable/Disable
Audio Digital/Analog
Select
Press MENU to exit.
7
NOTE
• Refer to your external equipment operation manual for the
signal type.
• "Signal Type" is only available when an HDMI-DVI
conversion cable is connected.
• "Audio Select" is only available for INPUT 4.
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
Description
Select the video signal type from
the HDMI terminal.
Set whether or not to use
View Mode based on signal
recognition, including an HDMI
signal.
Select "Digital" for an audio
signal via the HDMI terminal.
Select "Analog" for an audio
signal via the R-AUDIO -L
terminal.
31