Table of Contents
Advertisement
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP transparencies, adhesive labels, translu-
cent paper, envelopes, and copy paper that cannot be loaded in the paper trays.
Important
❒ Paper has a vertical length of 90-305 mm (3.6-12 inches) and a horizontal
length of 148-457.2 mm (5.9-18 inches) can be copied from the bypass tray.
❒ The machine can detect the following sizes as regular size copy paper:
• Metric version
A3L, A4L, A5L, 8 × 13L
• Inch version
11 × 17L, 8
1
/
If you want to use the size of paper other than the above, be sure to specify
the size.
❒ When paper larger than 433 mm (17.1 inches) in size is used, the paper may
become wrinkled, may not be fed into the machine, or may cause paper jams.
Using the Bypass Tray
Use the bypass tray to copy onto thick paper, envelopes, and copy paper that
cannot be loaded in the paper trays.
Important
❒ When copying on paper heavier than 104.7 g/m
specify the type and size of paper.
❒ The maximum number of sheets you can load into the bypass tray depends
on the paper type. Load only as much paper as can be held between the paper
guides on the bypass tray. Overloading the bypass tray can result in misfeeds
and skewed images.
❒ To prevent multiple sheets from being fed at once, fan paper before placing it
on the tray.
A
Open the bypass tray.
× 11L, 5
× 8
1
1
/
/
2
2
2
ALZ037S
Copying from the Bypass Tray
L
2
(about 28 lb.) you need to
2
21
Advertisement
Table of Contents
