Advanced Function Programming; Register Number And Consecutive Number Programming - Sharp XE-A201 Instruction Manual

A201_3 FOR THE MANAGER
Training mode text
For every receipts issued in the training mode, **TRAINING** is printed by default. When you want to change
the text, follow the procedure below.
s
Key operation example
S S
The programmed text is printed in double-size characaters on the receipts issued in the training
mode.

ADVANCED FUNCTION PROGRAMMING

Register Number and Consecutive Number Programming

1
Register number and consecutive number are printed on every receipt or journal.
When your store has two or more registers, it is practical to set separate register numbers for identification. The
consecutive number is increased by one each time a receipt or journal is issued.
For consecutive number programming, enter a number (max. 4 digits) that is one less than the desired starting
number.
Register number
s 1
Key operation example
123456
Setting consecutive numbers
s 2
Key operation example
01.11.11 10:22 AM Page 39
(12 digits)
87
s P
87
S S
TRAINING
s A
To set the register number "0"
@
Register number (one to six digits)
s @
1
s A
To begin the count from 0001
@
A number (one to four digits) that is one
less than the desired starting number
s @
2
s A
1000
To keep the current setting
P Character keys
(max. 12 digits)
Print
Print
Print
s A
s A
Register number
s A
Consecutive
number
39