Training Mode - Sharp XE-A201 Instruction Manual

A201_4 FOR THE MANAGER

TRAINING MODE

The training mode is used when the operator or the manager practices register operations.
When a clerk in training is selected, the machine automatically enters the training mode. To specify a clerk to be
trained, refer to "Training clerk specification for training mode" in "ADVANCED FUNCTION PROGRAMMING" in
page 48.
The training operation is valid only in REG, MGR and
The corresponding clerk memory is only updated in the training mode.
Key operation example
A clerk set in training
56
01.11.11 10:23 AM Page 56
L
15
>
1000
@
3
#
A
mode.
Print