Plu (Price Look-Up) And Subdepartment Programming - Sharp XE-A201 Instruction Manual

A201_3 FOR THE MANAGER
Key operation example
If a department is not programmed to allow the entry of preset unit prices in functional
programming, the department is automatically changed to allow the entry of preset unit prices by
this programming entry.

PLU (Price Look-Up) and Subdepartment Programming

2
The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered.
The subdepartment is a kind of "open PLU", which requires you to enter a price after the PLU code is entered.
By default, PLU/subdepartment setting for 1 through 200 codes are possible, and can extend to 1200. To
extend the number, please refer to "EJ memory type" on page 40.
Unit price and associated department assignment
p
PLU code
*1: To assign departments 17 through 32, press the department shift key.
When the associated department is department 33-50:
p
PLU code
*2: For a subdepartment, set the limit amount of unit price entry.
To program the following PLU code, start from entering a unit price or an associated department code without
A
pressing the key.
To program another PLU code, start from the beginning without pressing the
Key operation example
To delete a PLU code, use the following sequence:
28
01.11.11 10:22 AM Page 28
!
1000
A
To program zero
2
*
Unit price
(max. six digits)
d
Associated
dept. code
(33 to 50)
p
1
#
125
A
p
PLU code
To delete the following PLU code
To delete another PLU code
Print
1
*
D
Associated
Dept. key
To program zero
s
2
Unit price
*
(max. six digits)
A
key.
Print
PLU code
v A
Unit price
A
A
Unit price
Associated dept.