Programming Other Necessary Items - Sharp XE-A201 Instruction Manual

A201_1 01.11.11 10:20 AM
6

Programming other necessary items

While the cash register is pre-programmed so it can be used with minimal setup, it does provide you
with optional functions. Before you start programming, please read through the sales operations section to
understand optional functions.
Settings for introduction of EURO
The cash register can be modified to correspond with each period set for the introduction of EURO. By
executing the automatic EURO modification operation, you can easily make the cash register correspond to
EURO currency. For details, please refer to "EURO MIGRATION FUNCTION" on page 53.
Decimal point position (tab) setting for domestic currency
By default, "2" is selected. When your country has a different tab setting such as Spain, you must change the
setting. Please refer to "Other programming" of "Various Function Selection Programming 1" (Job code 61) on
page 43.
Rounding system
When your country has a special rounding system, such as Australia, Switzerland, Netherlands, Norway,
Sweden and Denmark, you must change the setting to suit your country. For the setting for Australia,
Switzerland, Netherlands and Norway, please refer to "Other programming" of "Various Function Selection
Programming 1" (Job code 67) on page 45. For the setting for Sweden and Denmark, please refer to "Other
programming" of "Various Function Selection Programming 1" (Job code 69) on page 46.
VAT/tax
The cash register provides 6 kinds of VAT/tax. Select an appropriate VAT/tax system first, then set tax rates (up
to 4 rates) and assign taxable status to departments. By default, taxable 1 is assigned to all departments.
7
Starting sales entries
Now you are ready for sales registration.
10
Page 10