Metra Electronics 99-7339B Installation Instructions Manual

For hyundai genesis coupe 2.0 2010

Download this manual

INSTALLATION INSTRUCTIONS FOR PART 99-7339

HYUNDAI GENESIS COUPE 2.0

99-7339B

99-7339S

KIT FEATURES

• ISO Head Unit Provision with Pocket

• Painted to match factory finish

99-7339B=Black 99-7339S=Silver

KIT COMPONENTS

A) Trim Panel B) ISO Brackets C) Pocket D) (6) PC-7503 Panel Clips E) (4) 3/8" Phillips Screws

• Small Flat Blade Screwdriver • Phillips Screwdriver

METRA. THE WORLD'S BEST KITS.™

1-800-221-0932

APPLICATIONS

2010

WIRING AND ANTENNA CONNECTIONS (Sold Separately)

Wiring Harness:

• 70-7303 - Kia/Hyundai Harness 2009 -up

Antenna Adapter:

• 40-KI11 - Kia/Hyundai Antenna Adapter 2007-up

TOOLS REQUIRED:

• Panel Removal Tool • Socket Wrench

www.metraonline.com

Page 1 A) Trim Panel B) ISO Brackets C) Pocket D) (6) PC-7503 Panel Clips E) (4) 3/8” Phillips Screws • Small Flat Blade Screwdriver • Phillips Screwdriver • Panel Removal Tool • Socket Wrench METRA. THE WORLD’S BEST KITS.™ 1-800-221-0932 © COPYRIGHT 2007-2010 METRA ELECTRONICS CORPORATION APPLICATIONS 2010 WIRING AND ANTENNA CONNECTIONS (Sold Separately) Wiring Harness: •...
Page 2 TABLE OF CONTENTS Dash Disassembly - Hyundai Genesis Coupe 2010 ......1 Kit Preparation - Hyundai Genesis Coupe 2010 .
Page 3 HYUNDAI GENESIS COUPE 2010 isconnect the negative battery ter- minal to prevent an accidental short circuit. Unclip and remove the shifter trim panel. (Figure A) Unclip and remove the radio/climate control trim panel. (Figure B) Unclip and remove the display trim panel above radio.
Page 4 HYUNDAI GENESIS COUPE 2010 Attach the climate control to the 95- 7336S trim plate using the factory hardware. (Figure A) Attach the (6) panel clips to the 95- 7336S trim plate. (Figure B) Continue to kit assembly 99-7339 KIT PREPARATION KIT PREPARATION...
Page 5 HYUNDAI GENESIS COUPE 2010 ISO DIN HEAD UNIT PROVISION Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. Attach the ISO brackets to the after- market radio (figure A), then secure the assembly to the pocket using the...
Page 6 99-7339 NOTES...
Page 7 99-7339 NOTES...

99-7339s