FX-1PG/FX
-1PG PULSE GENERATOR UNIT
2N
FX2N-1PG
•
The PGU is installed to the right side of a main unit or an extension unit of an FX
block. The PGU can be installed using a DIN rail (DIN 46277, Width: 35 mm) or directly installed using M4 screws. (For
the details, refer to the handy manual packed together with the main unit.)
OUTSIDE DIMENSIONS
Weight: Approx. 0.2 kg (0.44 lbs)
Terminal screw: M3
Terminal screw tightening torque:
0.5 to 0.8 N⋅m (5 to 8 kg⋅cm)
Applicable terminals:
Accessories: No. labels for special modules
Dimenssions : mm (inch)
Series PC or of an other extension
2N
2-2
2