Mitsubishi Electric FX-1PG User Manual page 7

FX-1PG/FX -1PG PULSE GENERATOR UNIT
2N
Guidelines for the safety of the user and protection of the FX-1PG/FX
pulse generator unit
This manual provides information for the installation and use of the FX-1PG/FX
been written to be used by trained and competent personnel. The definition of such a person or persons is as follows;
a) Any engineer who is responsible for the planning, design and construction of automatic equipment using the product
associated with this manual should be of a competent nature, (trained and qualified to the local and national standards
required to fulfill that role). These engineers should be fully aware of all aspects of safety with regards to automated
equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and qualified to the local and national
standards required to fulfill that job. These engineers should also be trained in the use and maintenance of the
completed product. This includes being completely familiar with all associated documentation for the said product. All
maintenance should be carried out in accordance with established safety practices.
c) All operators of the compliance product should be trained to use that product in a safe and coordinated manner in
compliance to established safety practices. The operators should also be familiar with all documentation which is
connected with the actual operation of the completed equipment.
Note: The term 'completed equipment' refers to a third party constructed device which contains or uses the product
associated with this manual.
-1PG
2N
-1PG pulse generator unit. The manual has
2N
ii