Mitsubishi Electric FX-1PG User Manual page 14

FX-1PG/FX -1PG PULSE GENERATOR UNIT
2N
2
2.
OUTSIDE DIMENSIONS
2.1
Outside Dimensions
FX-1PG
FX/FX Series PC or of an other extension block. The PGU can be installed using a DIN rail (DIN 46277, Width: 35 mm)
2C
or directly installed using M4 screws.
(For the details, refer to the handy manual packed together with the main unit.)
OUTSIDE DIMENSIONS
Weight: Approx. 0.3 kg (0.66 lbs)
Terminal screw: M3.5
Terminal screw tightening torque:
0.5 to 0.8 N⋅m (5 to 8 kgf⋅cm)
Applicable terminals:
Accessories: No. labels for special modules
Dimenssions : mm (inch)
•
The PGU is installed to the right side of a
main unit or an extension unit of an
2-1