6.0
Standalone-Lite Mode
The Standalone-Lite mode on your terminal allows it to transact on it's own in the event of a
POS outage, without the need for the POS.
It's important to know that the Standalone-Lite mode doesn't offer the full range of
functionality outlined earlier in this document. However, it does allow limited transaction
types to be performed without a connection to a POS system.
Communication options available in Standalone-Lite mode are Dial and 3G/GPRS. Refer to
the table below to see what you're able to do in Standalone-Lite mode.
Terminal Screen
Transaction
Types
Settlement &
Reporting
Switching between Standalone-Lite Mode and Integrated Mode
To switch the Standalone-Lite Mode on/off (i.e. between Standalone-Lite and Integrated
modes) use the following function commands (triggered on the idle screen using the "#" key):
•
Switch from Integrated to Standalone-Lite mode: Function 11112223.
•
Switch from Standalone-Lite to Integrated mode: Function 11112222.
6.1
Terminal Logon using Standalone-Lite Mode.
Terminal Screen
LOGON
REPRINT
SHIFT TOTALS
PREV
BANK LOGON
PLEASE WAIT
34
Live eftpos integrated User Guide
Next Step
Purchase
•
Cashout
•
Refund (password protected)
•
Pre-Settlement
•
Settlement
•
Last Settlement
•
Shift Totals
•
Duplicate Receipt
•
Next Step
Select Bank Logon on the terminal. This option is on page 3
of the idle screen.
NEXT
The Logon will be performed and will then return you to the
Standalone-Lite idle screen.