Advertisement
7. Test print.
Your printer is now connected.
To test your printer is working correctly follow the steps
below.
On a PC
Go to your Control Panel
Select Devices & Printers
Double click on the Printer
(DataMax-O'Neil w1110)
Note: If DataMax O'Neil w1110 is not available please
manually download your printer driver as in step 6.
1. Select Printer from the menu bar
2. Select Properties
3. Select General
4. Select Print Test Page.
Check that your label has printed correctly. If you have any
issues with the print refer to Troubleshooting later in this
document.
Troubleshooting
Printing problems on Datamax w1110
If you experience problems with a Datamax w1110 printer, such
as poor print quality, misaligned labels, jams, or flashing LED
indicator lights, ensure that the roll is properly installed in the
printer.
If the labels are blank, the roll may be loaded upside down.
The two green brackets in the Datamax printer are spring loaded
to keep the roll in place. Slide the green brackets apart to place
the roll between them with the adhesive labels on the top and the
disposable material on the bottom.
*AW32661reva*
AW32661 Rev. A 05/18
©2018 Pitney Bowes Inc.
All Rights Reserved
If you're still having trouble, then visit
support.pb.com/workstation
and select Errors & Troubleshooting.
3001 Summer St.
Stamford, CT 06926
www.pitneybowes.com
Advertisement
