Supermicro X11SCZ-F/Q User Manual page 99

Chapter 4: BIOS
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
*If the feature above is set to Enabled, the next seven features will be available for
configuration:
Ipv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
Ipv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.
Ipv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
IPSEC Certificate
The feature appears if Network Stack is enabled. Internet Protocol Security (IPSEC) offers
a secure connection for remote computers using a secure tunnel. The options are Enabled
and Disabled.
PXE boot wait time
Use this feature to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or "-" on your
keyboard to change the value. The default setting is 1.
HTTP BOOT Configuration

HTTP BOOT Configuration
Http Boot One Time
Use this feature to create the HTTP boot option. The options are Disabled and Enable.
Input the desrciption
Highlight the feature and press enter to create a description.
Boot URI
Highlight the feature and press enter to create a boot URI.
99