Supermicro X11SCZ-F/Q User Manual page 38

Super X11SCZ-F/Q User's Manual
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and the LED connection for LAN Port 2 is on pins 9 and 10. Attach NIC
LED cables to NIC1 and NIC2 LED indicators to display network activities. Refer to the table
below for pin definitions.
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable here to show
hard drive activity status. Refer to the table below for pin definitions.
UID LED (X11SCZ-F only)
LAN1/LAN2 LED
Pin Definitions (JF1)
Pins Definition
9/11 +3.3V Stby
10/12 NIC Activity LED
HDD LED
Pin Definitions (JF1)
Pins Definition
13 +3.3V Stby
14 HD LED
1 2
PWR
Power Button
Reset Reset Button
3.3V (X11SCZ-F only)
3.3V Stby
3.3V Stby
3.3V Stby
3.3V Stby
X
NMI
19 20
Ground
Ground
Power Fail LED (X11SCZ-F only)
OH/Fan Fail LED
2
NIC2 Activity LED
1
NIC1 Activity LED
3
HDD LED
FP PWRLED
X
Ground
38
1. NIC1 Activity
2. NIC2 Activity
3. HDD LED