Supermicro X11SCZ-F/Q User Manual page 100

Super X11SCZ-F/-Q User's Manual
Trusted Computing

*The features in the Trusted Computing section on this page are displayed if a TPM
1.2 module is detected:
Configuration
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM support to enhance data integrity and network
security. Please reboot the system for a change on this setting to take effect. The options
are Disable and Enable.
TPM State
Select Enabled to use TPM (Trusted Platform Module) settings to enhance system data
security. Please reboot your system for any change on the TPM state to take effect. The
options are Disabled and Enabled.
Pending Operation
Use this feature to schedule a TPM-related operation to be performed by a security device
for system data integrity. Your system will reboot to carry out a pending TPM operation. The
options are None and TPM Clear.
Note: Your system will reboot to carry out a pending TPM operation.
Device Select
Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2 devices.
TPM 2.0 will restrict support for TPM 2.0 devices. Select Auto to enable support for both
versions. The default setting is Auto.
Current Status Information
This feature displays the status of the TPM support on this motherboard.
•
TPM Enabled Status
•
TPM Active Status
•
TPM Owner Status
SMCI BIOS-Based TPM Provision Support (not available on the -F SKU)
Use feature to enable the Supermicro TPM Provision support. The options are Disabled and
Enabled.
100