Supermicro X11SCZ-F/Q User Manual page 93

PCH-FW Configuration
ME Firmware Version: 12.0.3.1091
ME Firmware Mode: Normal Mode
ME Firmware SKU: Corporate SKU
ME FW Image Re-Flash
Use this feature to update the Mangement Engine firmware. The options are Disabled and
Enabled.
Manageability Features State
Enabled this feature to allow system administrators to configure the ME BIOS extension
(MEBx) configuration settings. The options are Disabled and Enabled.
AMT BIOS Features
Disable this feature to deny access to the MEBx setup. The options are Disabled and Enabled.
*If the feature "AMT BIOS Features" is set to Enabled, the AMT Configuration submenu
will be available for configuration:
AMT Configuration
ASF support
Use this feature to enable or disable Alert Standard Format support. This feature sends an
alert about a potential issue when the operating system is in a sleep state. The options are
Disabled and Enabled.
USB Provisioning of AMT
Use this feature to enable or disable USB provisioning. The options are Disabled and Enabled.
CIRCA Configuration

Activate Remote Assistance Process
Use this feature to activate Remote Assistance. Enabling this feature will also trigger the
CIRCA boot. The options are Disabled and Enabled.
*If the feature "Activate Remote Assistance Process" above is set to Enabled, the
feature below will be available for configuration:
CIRCA Timeout
Use this feature to set the timeout value for MPS connection. Use 0 for the default timeout
value of 60 seconds.
93
Chapter 4: BIOS