Supermicro X11SCZ-F/Q User Manual page 15

BIOS
•
256Mb SPI AMI BIOS
®
•
ACPI 6.1, SMBIOS 3.1, UEFI 2.6 specification, PCI F/W 3.0, Plug-and-Play (PnP), SPI Dual/quad speed support, RTC
wakeup
Power Management
•
Power button override mechanism
•
Management Engine (ME)
•
Power-on mode for AC recovery
Fan Control
•
X11SCZ-F: Fan status monitoring with firmware 4-pin fan speed control via IPMI interface. Multi-fan speed control via
onboard BMC
•
X11SCZ-Q: Multi-fan speed control via onboard Super I/O
System Health Monitoring
•
Onboard voltage monitoring for +3.3V, +3.3V standby, +5V, +5V standby, +/-12V, VBAT, HT, Memory, PCH Temp., System
Temp., Memory Temp.
•
CPU switching phase voltage regulator
•
CPU Thermal Trip support
System Management
•
Trusted Platform Module (TPM) support
•
PECI (Platform Environment Control Interface) 3.1 support
•
UID (Unit Identification)/Remote UID
•
System resource alert via SuperDoctor® 5
•
Watch Dog, NMI
LED Indicators
•
Power/Suspend-state indicator LED
•
UID/remote UID (X11SCZ-F only)
Dimensions
•
9.6" (L) x 9.6" (W) (243.84mm x 243.84mm)
Note 1: The CPU maximum thermal design power (TDP) is subject to chassis and
heatsink cooling restrictions. For proper thermal management, please check the chas-
sis and heatsink specifications for proper CPU TDP sizing.
Note 2 (X11SCZ-F only): For IPMI configuration instructions, please refer to the
Embedded IPMI Configuration User's Guide available at
support/manuals/.
Note 3 (X11SCZ-F only):: It is strongly recommended that you change BMC log-in
information upon initial system power-on. The manufacture default username is ADMIN
and the password is ADMIN. For proper BMC configuration, please refer to
supermicro.com/products/nfo/IPMI.cfm.
Motherboard Features
SM Flash UEFI BIOS
http://www.supermicro.com/
15
Chapter 1: Introduction
https://www.