Supermicro X11SCZ-F/Q User Manual page 94

Super X11SCZ-F/-Q User's Manual
ASF Configuration

PET Progress
Use this feature to enable or disable PET Events Progress to receive PET Events alerts.
The options are Disabled and Enabled.
WatchDog
Select Enabled to allow AMT to reset or power down the system if the operating system
or BIOS hangs or crashes. The options are Disabled and Enabled.
OS Timer / BIOS Timer
These options appear if Watch Dog (above) is enabled. This is a timed delay in seconds,
before a system power down or reset after a BIOS or operating system failure is detected.
Enter the value in seconds.
ASF Sensors Table
Enable this feature for the ASF Sensor Table to be added into the ASF! ACPI table. The
options are Disabled and Enabled.
Secure Erase Configuration

Secure Erase mode
Select Real to securely erase a solid state drive. The options are Simulated and Real.
Force Secure Erase
Select Enabled to force a secure erase of the solid state drive on the next boot. The options
are Disabled and Enabled.
OEM Flags Settings

MEBx hotkey Pressed
Use this feature to specify whether the MEBx hotkey should be enabled during the system
boot. The options are Disabled and Enabled.
MEBx Selection Screen
Use this feature to select the type of MEBx selection screen. Press 1 to enter the ME
Configuration screen and 2 to initiate a remote connection. Network access must be
activated for a remote connection. The options are Disabled and Enabled.
Hide Unconfigure ME Confirmation Prompt
Use this feature to hide the unconfigure ME confirmation prompt . The options are Disabled
and Enabled.
94