Table of Contents
Advertisement
CRS-300 1:10 Redundancy Switch
Installation
•
PROPER AIR VENTILATION IS REQUIRED.
o Air temperature inside the rack enclosure should
o Since the Switch itself is relatively passive, no additional clearance is needed
o The CRS-300
o Make sure there is adequate clearance inside the enclosure, especially at the
For information about custom rack enclosures, contact Comtech EF Data Product
Support.
between it and the nearest modem.
CANNOT
have rack slides mounted to the sides of the chassis –
air flow must not be impeded. Comtech EF Data recommends that an
alternate method of support is provided within the rack, such as standard rack
shelves, as needed.
sides, for air ventilation. In a rack system where there is high heat discharge,
provide forced-air cooling with top- or bottom-mounted fans or blowers.
NEVER
2–3
MN/CRS300.IOM
Revision 19
exceed 50°C (122°F).
Advertisement
Table of Contents
