Table of Contents
Advertisement
CRS-300 1:10 Redundancy Switch
Cables and Connections
•
HD-15F connector labeled "J1" on the Switch RMI or TMI(s), to
•
HD-15F connector labeled "J9 Auxiliary" on the SLM-5650/5650A.
4.6.3
Traffic Data Connections – CRS-300 to Modems
Referring to Figure 4-16:
If HSSI is the traffic data type, do these steps to connect and secure the HSSI Data Cable
CA/WR9189-6 between the Switch and each SLM-5650/5650A:
•
HSSI (HD-50F) connector labeled "J2" on the Switch RMI or "J3" on the Switch TMI(s), to
•
HSSI (HD-50F) connector labeled "J7 HSSI" on the SLM-5650/5650A.
If EIA-530/-232 is the traffic data type, do these steps to connect and secure the Control/Data
Cable CA/WR0066 (for data purposes) between the Switch and each SLM-5650/5650A:
•
DB-25M connector labeled "P2" on the Switch RMI, or "P1" on the Switch TMI(s), to
•
DB-25F connector labeled "J6 EIA530" on the SLM-5650/5650A.
Referring to Figure 4-17:
If Balanced G.703 is the traffic data type, do these steps to connect and secure the
CA/WR9038-1 cable between the Switch and each SLM-5650/5650A:
•
DB-15M connector labeled "P1" on the Switch RMI or TMI(s), to
•
DB-15F connector labeled "J1 Bal Data" on the SLM-5650/5650A.
If Unbalanced G.703 is the traffic data type, do these steps to connect and secure the pair of
BNC PL/0813-8 cables between the Switch and each SLM-5650/5650A:
•
BNC connectors labeled "J4 Tx" on the Switch RMI, or "J3 Tx" on the Switch TMI(s), to BNC
connectors labeled "J3 Rx" on the SLM-5650/5650A, and
•
BNC connectors labeled "J3 Rx" on the Switch RMI, or "J5 Rx" on the Switch TMI(s), to BNC
connectors labeled "J2 Tx" on the SLM-5650/5650A.
4–43
MN/CRS300.IOM
Revision 19
Advertisement
Table of Contents
