Front Panel Led Indicators; Switch Status Led Indicators - Comtech EF Data CRS-300 Installation And Operation Manual

CRS-300 1:10 Redundancy Switch
Front Panel Operation

6.1.1 Front Panel LED Indicators

6.1.1.1

Switch Status LED Indicators

The LEDs function individually as follows:
LED
UNIT STATUS
STORED EVENT
REMOTE
These three front panel LEDs are located adjacent to the keypad. They show
the operational status of the CRS-300 1:10 Redundancy Switch.
Condition Description
Green Normal operation (no Switch Faults)
Red Switch Fault, e.g., PSU fault or COMMS failure
Off No Stored Events
Orange Switch has Stored Events
Orange
(Flashing)
Switch is in Local Mode – remote monitoring is possible, but remote
Off
configuration control is not allowed
Switch is in Remote Mode – configuration changes are disabled via the
Orange
front panel keypad
6–2
CAUTION – Switch is in MANUAL mode
MN/CRS300.IOM
Revision 19